Paper and binding
Which paper suits a novel, workbook or illustrated book?
Proof a representative spread on the actual stock. A novel asks for comfortable reading, a workbook needs a usable writing surface, and illustrations need detail in both highlights and shadows.
Start with what readers will do
For a novel, compare a few pages on white and natural-shade uncoated stock in ordinary reading light. For a workbook, use the pen or pencil your reader will use, close the book, then check the opposite page for smudging. For illustrated work, test a dark image, subtle skin tones and the smallest caption together.
Choose pages that will expose weaknesses in your particular book. A line drawing with fine hatching is more revealing for a field guide than a colour photograph of a sunset. A workbook with pencil diagrams needs a different test from a workbook filled with fountain-pen answers. Mark the stock name lightly in the margin of each proof so you can identify it after handling.
Look at both sides of the sheet
GSM is the mass of a square metre of paper. Opacity describes how well the sheet hides what is behind it. Print a dense paragraph or dark illustration on the reverse of light text and read the light side. Compare both samples under the same lamp so lighting does not decide the result.
Distinguish show-through from bleed-through. When text on the reverse is visible because light passes through the sheet, the problem is opacity. When ink from a reader’s pen actually penetrates the fibres and marks the reverse, the problem is bleed-through. Put a clean sheet underneath while writing, then lift the written sheet and inspect its back. The remedy depends on which effect you see.
Record a specification you can order again
Write the stock name, weight, shade and finish on each test and keep the chosen sheet with the approved proof. If the stock changes, request a new sample and check the spine before reusing an existing cover.
Request swatches to narrow the shortlist, then ask whether a printed sample can use the same stock and printing process as the planned run. A blank swatch tells you about shade, weight and feel. A double-sided printed sample tells you whether the page still reads well with ink on both faces. Keep an untouched sheet for comparison if a replacement stock is proposed later.
Run a comparison at your own desk
For a short illustrated biography, select a page of ordinary prose, a black-and-white portrait with detail in dark hair, and a page of small captions. Print the three pages on both shortlisted stocks at the same dimensions. Lay the proofs over an ordinary stack of pages and compare them under the same light. Hold each at normal reading distance, then tilt the portrait toward a lamp to judge glare.
Score each sample against the job it has to do. If both pass the text test but one loses detail in the portrait, decide whether that photograph carries information the reader needs. If the book will mostly be read under bright classroom lights, a finish that reflects the lamp across the captions deserves another proof.
| Bring this page | Use it to check |
|---|---|
| Longest uninterrupted chapter page | Ease of reading and show-through from the reverse. |
| Darkest photograph beside a caption | Shadow detail, glare and small type in ordinary light. |
| A real exercise and the intended pen | Drying time, smudging and marks on the next sheet. |
Estimate what heavier paper adds to the parcel
For an A5 book, one leaf has an area of 0.148 × 0.210 metres. A 160-page double-sided interior contains 80 leaves. At 80 GSM the trimmed interior alone weighs about 199 g. At 100 GSM it weighs about 249 g. The difference is roughly 50 g per book. The cover, binding and packaging add weight to both. Weigh the packed proof before choosing a delivery bracket. A postal estimate based on an unbound interior can make a cheaper stock look more economical than it is.